The independent creation of a metal bed, although a bit difficult and technically difficult project, but very interesting. To manufacture such a structure, some skills will be needed, in particular, at least basic forging or welding skills, patience and time. In addition, special equipment is needed. But if you still decided to make a bed, then the article below will help to implement the plan.
Types of metal bed designs
The number of metal bed options available on the market can satisfy any request.
Two types of designs can be distinguished:
- Forged. Their base consists entirely of pipes. They are relatively light: the weight is always no more than 50-55 kg. There are two types of forging: cold and hot. In the 1st case, a person does practically nothing: the apparatus does everything necessary, so the assembly remotely resembles stamping. If it comes to another method, then the master does the main work. He heats a metal product to a temperature of 600 degrees, after which, when forging, it gives the necessary shapes to the parts.
- Welded. The main difference from the previous view is the method of joining parts, i.e. welding.
Preparation for the manufacture of a metal bed: drawings
- create a drawing - we recommend using the options presented on the Internet;
- purchase materials and, if necessary, tools;
- buy a mattress - formally, this item should go under number one, because based on the size of the mattress, the future dimensions of the structure are determined.
Tools for work
To make an iron bed yourself, you will need the following list of tools:
- Welding machine.
- Angle grinder (grinder).
- Drill and several drill bits for metal.
- Measuring instruments.
- Paint brushes.
- Lacquer.
As mentioned above, a feature of welded structures is the method of fastening parts. They are connected by welding. If you decide to pay attention to the forged varieties of beds, then you will need blacksmith equipment. The list changes depending on the style. We recommend consulting with a specialist.
Do-it-yourself metal bed: step-by-step technology
Based on the selected drawing, prepare blanks made of profile pipes - they will become the basis of the future back. Lay them out on a level place, in accordance with the scheme, and then fix by welding. Pay close attention to the degree of angles if you want an even construction. Then, the steps and plugs are installed on the ends of the pipes.
Next step. You will need a grinder and a channel. Brackets are created to attach the frame. Again, it is worth starting from the drawing, but the following proportion is almost always observed: 2 in the center, 4 on the sides, the slope of the latter should be 5 degrees. Attach the frame to the back with a solid seam. The accepted distance to the floor is no more than 0.45 m.
IMPORTANT! Channel bars (best made of steel) should be cut into special blanks. The most optimal calculation: the length of the frame + 4-7 cm. The channels should be connected by corners.
Decorating an iron bed
To give a more pleasant appearance to the created design, it is necessary to cut off any irregularities, seams, etc. with a grinder, after which it should already be brushed and sanded.
Leave Your Comment